Sandblasting & Metal Finishing Equipment

Zero Blast Cabinets

Zero Blast-N-Peen - the number one line of blasting cabinets. The heart of the Zero equipment is the Reclaim Separator System. Its primary function is to continuously remove all of the media and blasting by-products from the blast cabinet and separate the reusable media from the junk - returning only good media to the blast gun and exhausting the dust into one of several types of dust collectors.

The added advantage is that as the reclaim draws air through the cabinet it creates downdraft to ensure excellent visibility during the blasting process.

Many cabinet styles and sizes are available. Some of the larger cabinets are available either as "Venturi Suction Blast" or as "Direct Pressure Blast" systems.

Clemco Pressure Pots

Clemco Pressure Blast systems are available from 0.5 cu ft (formerly called 50 lb) capacity to 6.0 cu ft (600 lb) to 160 cu ft (8 ton) capacity blast machines.

These units always have the required safety controls and are available for multiple operators as well as "abrasive cutoff" controls.

Special Application Equipment

For those specialized blast applications we have many types of equipment available. For the very small jobs that require minor touch up to large trailer mounted blast and recovery systems. We have the Wetblast Injector System accessory for the pressure pots and the Spin Blast Pipe Cleaning systems for blasting the ID of pipe from 3/4" to 60". Also available are the closed-circuit blast systems which contain the media and dust for a cleaner blasting environment and the Orbiter Pipe Painting System.

Aerolyte Systems

All Aerolyte stripping systems use proven blast cleaning technology, refined for use with lightweight, fine mesh abrasive. Please refer to each systems link for it's job specific application and design.

Clemco Blast Rooms

Clemco blast rooms can be configured to nearly any size and shape required. From a small room for patio furniture to a large room for a large aircraft like a 747! We offer "Pre-Assembled" blast rooms which require very little assembly.

Media recovery can be as varied as the media being used. Pneumatic recovery is applicable for light or fine medias such as glass beads, plastic, and fine aluminum oxide. Mechanical recovery (scraper floors or augers) may be necessary for heavy media like steel shot or steel grit.

Recovery systems may also be partial floor systems which require sweeping or scooping media into the recovery system or full floor recovery systems which do not require sweeping.

Sweco Vibratory Finishing Equipment

Sweco Vibratory finishing mills are available in several sizes from 1.0 cu ft capacity to 70 cu ft. When used with the correct type of tumbling media, vibratory mills provide an efficient method to deburr, radius, and enhance the surface finish of machined or cast parts.

Sonicor Ultrasonic Cleaning Equipment

The power of ultrasonic cleaning is available from Sonicor Instrument Corp. From small individual cleaning tanks to complete pass through systems.